Collection: Nisca Ribbons, Retransfer Film & Laminates
Nisca printers fall into two groups, and each takes its own supplies. The PR5000 series (PR5100, PR5200, PR5300, PR5310, PR5350 and PR53LE) are retransfer printers. The PR-C101 is a direct-to-card printer. The PR-C201 uses its own retransfer film. Check the model on the label at the back of your printer, then use the list below.
Ribbons by printer
-
PR5100, PR5200, PR5300 and PR5310: NGYMCKO2 YMCKO (250 prints) and NGYMCKOK2 YMCKOK (210 prints). The YMCKOK also fits the PR5350.
-
PR5350 and PR53LE: NGYMCKO3/3BP YMCKO (250 images).
-
PR5300, PR5310 and PR5350: NGYMCFK YMCFK with a UV panel (250 images).
-
PR-C101: NGYMCKOPRC YMCKO and NGBKPRC black.
-
Black monochrome: NGBK (1,250 prints) and NGBK-OP KO ribbon.
-
PR-C201: InTM clear retransfer film (500 prints).
Overlaminates and thin film
Laminating models such as the PR5200 and PR5300 can add a patch over the printed card. We carry 0.5 mil and 1.0 mil clear patches, alternating clear and Secure ID holographic rolls, and patches cut out for a contact chip or a magnetic stripe. Thin film overlays (clear, GenuineSecure V2, Generic Secure ID and NiscaPrint400 holographic) add a light protective layer in place of a full patch.
Choose 1.0 mil patches for cards that are swiped, tapped and carried every day. Choose a cut-out patch if your cards have a contact chip or mag stripe that must stay exposed.
FAQ
What is the F panel in YMCFK?
F is a fluorescent (UV) panel. It prints an image that only shows under a UV light, which helps spot fake cards.
Does every Nisca printer laminate?
No. Only models fitted with a laminator take overlaminate patches. Check your model before ordering laminate.
Is NGYMCKO2 the same as NGYMCKO3?
No. NGYMCKO2 is for the PR5100 to PR5310. NGYMCKO3/3BP is for the PR5350 and PR53LE.
Read ID card printer ribbon types to learn what each panel does.
